Advanced Materials Division
Oils
PFPE, MAC and PAO oils, greases and hydraulic fluids graded for vacuum, cleanroom and utility equipment.
74 Materials
| Code | Material | Machine Specifics | Application |
|---|---|---|---|
| ASO-01 | PFPE Vacuum Oil – 140 cSt @ 40°C, ultra-low-outgassing grade | Machine Grade | Lubrication of precision components operating under high vacuum |
| ASO-02 | PFPE Vacuum Oil – 187 cSt @ 40°C, high-vacuum grade | Machine Grade | Vacuum bearings, precision mechanisms and semiconductor process equipment |
| ASO-03 | PFPE Vacuum Oil – 192 cSt @ 40°C, cleanroom grade | Machine Grade | Bearings and mechanisms requiring chemical inertness and low contamination |
| ASO-04 | PFPE Vacuum Oil – 446 cSt @ 40°C, heavy-viscosity grade | Machine Grade | High-load/high-vacuum lubrication and seal applications |
| ASO-05 | PFPE Oil – 809 cSt @ 40°C, ultra-heavy-viscosity grade | Fab cleanroom | Static seals and damping applications where a grease-like consistency is required |
| ASO-06 | PFPE Grease – NLGI 1, PTFE-thickened, ~140 cSt base oil | Machine Grade | Bearings, linear guides, ball screws and wafer-handling mechanisms |
| ASO-07 | PFPE Grease – NLGI 2, PTFE-thickened, ~187 cSt base oil | Machine Grade | High-vacuum bearings and precision mechanisms |
| ASO-08 | PFPE Grease – NLGI 2, ~186–200 cSt, high-temperature grade | Etch/CVD equipment | High-temperature bearings and moving mechanisms |
| ASO-09 | PFPE Grease – NLGI 2, ~360–460 cSt, heavy-viscosity grade | Vacuum equipment | High-load bearings, guides and mechanisms |
| ASO-10 | PFPE Grease – low-outgassing, low-particle grade | Lithography/etch/deposition equipment | Lubrication where particle and vapor contamination must be minimized |
| ASO-11 | PFPE Grease – chemically inert, solvent-resistant grade | Etch/CVD areas | Components exposed to aggressive process gases and chemicals |
| ASO-12 | MAC Oil – 108 cSt @ 40°C, low-outgassing grade | Machine Grade | Precision bearings, guides and mechanisms in vacuum environments |
| ASO-13 | MAC Oil – 108 cSt @ 40°C, ultra-filtered vacuum grade | Wafer-processing equipment | High-vacuum precision lubrication |
| ASO-14 | MAC Grease – PTFE-thickened, NLGI 1, 108 cSt base oil | Wafer handling equipment | Bearings, linear guides, ball screws and lead screws |
| ASO-15 | MAC Grease – PTFE-thickened, NLGI 1, low-torque grade | Wafer robots/stages | Precision motion with low friction and low torque |
| ASO-16 | MAC Grease – PTFE-thickened, 108 cSt base oil, high-load grade | Linear guides/ball screws | Wear protection under mechanical load |
| ASO-17 | Synthetic Hydrocarbon / PAO Oil – low-outgassing grade | Non-process machinery | Precision mechanical equipment where PFPE is not required |
| ASO-18 | PAO Synthetic Gear Oil – ISO VG 68 | Utility/mechanical rooms | Gearboxes and mechanical drives |
| ASO-19 | PAO Synthetic Gear Oil – ISO VG 100 | Utility plant | Medium-load industrial gearboxes |
| ASO-20 | PAO Synthetic Gear Oil – ISO VG 150 | Utility plant | Higher-load gearboxes |
| ASO-21 | PAO Synthetic Gear Oil – ISO VG 220 | Utility plant | Heavy-duty gearboxes |
| ASO-22 | PAO Synthetic Gear Oil – ISO VG 320 | Utility plant | Heavy-load, low-speed gear systems |
| ASO-23 | Synthetic Compressor Oil – ISO VG 32 | Central utility plant | High-speed rotary/screw compressors |
| ASO-24 | Synthetic Compressor Oil – ISO VG 46 | Central utility plant | Air compressors and process-gas support equipment |
| ASO-25 | Synthetic Compressor Oil – ISO VG 68 | Utility plant | Higher-temperature/heavy-load compressors |
| ASO-26 | Hydraulic Oil – ISO VG 32, low-ash industrial grade | Assembly/molding area | Hydraulic equipment and precision actuators |
| ASO-27 | Hydraulic Oil – ISO VG 46, anti-wear grade | Molding/assembly equipment | Hydraulic injection molding machines |
| ASO-28 | Hydraulic Oil – ISO VG 68, anti-wear grade | Heavy packaging equipment | Higher-load hydraulic systems |
| ASO-29 | Spindle Oil – ISO VG 5 | Wafer grinding | Very-high-speed spindle lubrication |
| ASO-30 | Spindle Oil – ISO VG 10 | Wafer grinding/dicing | High-speed precision spindle bearings |
| ASO-31 | Spindle Oil – ISO VG 22 | Grinding/polishing equipment | Precision spindle lubrication |
| ASO-32 | Low-Outgassing Bearing Oil – synthetic ester, ~61 cSt @ 40°C | Vacuum/turbomolecular pump systems | Bearing lubrication in vacuum pumps |
| ASO-33 | Synthetic Ester Vacuum Pump Oil – ~61 cSt @ 40°C | Vacuum systems | Turbomolecular pump bearing lubrication |
| ASO-34 | Synthetic Ester Vacuum Grease – ~61 cSt base oil, lithium-thickened | Turbomolecular pumps | Pump bearings and mechanical components |
| ASO-35 | PTFE-Thickened Ester Grease – ~61 cSt base oil | Turbomolecular pump systems | Vacuum-compatible bearing lubrication |
| ASO-36 | Rotary Vane Vacuum Pump Oil – ISO VG 68 | Vacuum utility/process area | Rotary vane vacuum pumps |
| ASO-37 | Rotary Vane Vacuum Pump Oil – ISO VG 100 | Vacuum systems | Higher-temperature/heavy-duty rotary pumps |
| ASO-38 | Diffusion Pump Fluid – high-vacuum synthetic grade | High-vacuum systems | Diffusion pump operation |
| ASO-39 | PFPE Diffusion Pump Fluid – ultra-low-vapor-pressure grade | High/ultra-high vacuum | High-purity vacuum pumping |
| ASO-40 | Turbo Pump Bearing Oil – synthetic ester, low-outgassing grade | Etch/CVD/PVD equipment | Turbomolecular pump bearings |
| ASO-41 | Cleanroom Bearing Oil – PFPE, ultrafiltered grade | Cleanroom process equipment | Precision bearings with stringent particle requirements |
| ASO-42 | Cleanroom Bearing Grease – PFPE/PTFE, NLGI 1 | Wafer-handling equipment | Robot and precision-bearing lubrication |
| ASO-43 | Cleanroom Bearing Grease – PFPE/PTFE, NLGI 2 | Process equipment | Long-life high-load bearing lubrication |
| ASO-44 | Cleanroom Linear Guide Grease – MAC/PTFE, NLGI 1 | Wafer stages | Linear guide and rail lubrication |
| ASO-45 | Cleanroom Ball Screw Grease – MAC/PTFE, NLGI 1 | Wafer handling/robotics | Ball and lead screw lubrication |
| ASO-46 | Low-Outgassing Robot Joint Grease – PFPE/PTFE, NLGI 1 | Wafer robots | Robot joints operating in clean/vacuum environments |
| ASO-47 | Low-Particle Robot Gear Grease – PFPE/PTFE | Wafer transfer systems | Precision gears and actuators |
| ASO-48 | High-Temperature PFPE Oil – 250°C-class | Etch/deposition equipment | High-temperature precision lubrication |
| ASO-49 | High-Temperature PFPE Grease – NLGI 2, 250°C-class | Etch/CVD/PVD equipment | Bearings and mechanisms exposed to high temperatures |
| ASO-50 | Ultra-Low-Outgassing PFPE Grease – ASTM E595 qualified | High-vacuum process equipment | Minimizes molecular contamination |
| ASO-51 | Ultra-Low-Particle PFPE Grease – cleanroom grade | Lithography/wafer handling | Minimizes particle generation |
| ASO-52 | Thermal Transfer Fluid – synthetic hydrocarbon, high-temperature grade | Utility/process cooling | Heat-transfer systems |
| ASO-53 | Synthetic Heat-Transfer Fluid – 200°C-class | Process utility plant | High-temperature thermal systems |
| ASO-54 | Silicone Heat-Transfer Fluid – low-viscosity grade | Thermal processing | Temperature-controlled equipment |
| ASO-55 | Dielectric Cooling Fluid – fluorinated, non-conductive grade | SiC/GaN facilities | Electrical/thermal cooling |
| ASO-56 | Fluorinated Electronic Cooling Fluid – low-viscosity grade | Test/burn-in facilities | Direct/indirect cooling of electronics |
| ASO-57 | Transformer Oil – IEC 60296 mineral insulating oil | Electrical substation | Transformer insulation and cooling |
| ASO-58 | Synthetic Ester Transformer Fluid – fire-resistant grade | Electrical substation | Transformer insulation/cooling where fire safety is prioritized |
| ASO-59 | Refrigeration Compressor Oil – POE, ISO VG 32 | Chiller/HVAC plant | Refrigeration compressor lubrication |
| ASO-60 | Refrigeration Compressor Oil – POE, ISO VG 46 | Chiller plant | HVAC and process-cooling compressors |
| ASO-61 | Synthetic PAO Refrigeration Oil – ISO VG 68 | Chiller systems | Compressor lubrication |
| ASO-62 | Food-Grade Synthetic Lubricant – NSF H1, ISO VG 68 | Non-process auxiliary equipment | Lubrication where incidental-contact requirements apply |
| ASO-63 | Synthetic Chain Oil – high-temperature grade | Packaging/assembly lines | Conveyor and high-temperature chain lubrication |
| ASO-64 | PFPE Chain Lubricant – high-temperature/cleanroom grade | Thermal/assembly equipment | Cleanroom-compatible chain lubrication |
| ASO-65 | Synthetic Gear Oil – low-particle/cleanroom-compatible grade | Automated packaging equipment | Precision gearbox lubrication |
| ASO-66 | Molding Machine Hydraulic Oil – ISO VG 46, anti-wear grade | Epoxy molding/encapsulation | Injection molding hydraulics |
| ASO-67 | Die-Attach Equipment Lubricant – low-particle synthetic grade | Die-attach equipment | Precision moving components |
| ASO-68 | Dicing Equipment Spindle Oil – ISO VG 5/10 | Dicing equipment | High-speed spindle bearings |
| ASO-69 | Grinding Spindle Oil – ISO VG 5/10 | Wafer backgrinding | Ultra-high-speed spindle lubrication |
| ASO-70 | CMP Equipment Bearing Grease – cleanroom PFPE grade | CMP equipment | Bearings and moving mechanisms |
| ASO-71 | Plating-Line Gear Oil – ISO VG 150/220 | Package/substrate plating | Gearboxes and drives |
| ASO-72 | Plating Equipment Hydraulic Oil – ISO VG 32/46 | Electroplating line | Hydraulic systems |
| ASO-73 | Thermal Interface Oil/Fluid – dielectric synthetic grade | SiC/GaN testing/packaging | Thermal management |
| ASO-74 | Silicone Dielectric Fluid – low-viscosity electronic cooling grade | Power semiconductor testing | Non-conductive heat transfer |